AWP-30 Inorganic waterproofing material

Product Description

AWP-30 is an inorganic waterproofing material, easy to use. This is claimed to the most advanced waterproofing material in science research and recently, it's expanded to apply widely in many constructions.
AWP-30 is produced in liquid form, non-toxic.

Product Detail

Advantages

AWP-30 sprayed into concrete should combination with free CaO to create Calcium silicates, which available to penetrate up to 15 ¸ 20 mm in concrete. It will be an optimum effective waterproofing membrane.
AWP-30 increases compactness of concrete and makes surface hardened without stripping.
AWP-30 resistant to oil, water, gasoline.
AWP-30 should seal itself cracks created by thermo effect of concrete at the best.
AWP-30 eliminates alkali reduction in concrete caused by environment, therefore increases effectively durability for concrete.
AWP-30 increases cohesion between concrete and patching mortar up to 30 times.

Field of application

Waterproofing for new and old constructions such as horizon roof, W/C area, wall...
AWP-30 is used especially for concrete of bridge surface, airport runway, and road... with extremely high economical and technical effect.

Technical data
Appearance:
Color:
Density:
pH value:
Coverage at the best
Packing:

Liquid form.
Light yellow, transparence
1,20 ± 0,02.
11,7
0.2l/m²
20, 200 ltr./drum

Application

Application process could be implemented very easily; AWP-30 shall be sprayed directly on the concrete surface after getting rid out of dust. Its consumption is normally taken from 4 up to 6m² per 01 litter of concrete surface. After checking by sense to ensure it dried (approx. 3-6 hours), fulfill curing by water sprayer, then cure daily during 2-3 days.

Storage

Due to the report of the researchers, its shelf life is unlimited if it's protected well from UV of sunshine.

Product Category

AWP-30 Inorganic waterproofing material

Product Description

Product Detail

Related products

Technology and Special Material – SPEMAT Co., Ltd